Plate-type recuperator

Recuperation is a process of recycling heat in various systems without the use of utilities.

Energy recovery is a necessity in production and makes it possible saving money on energy resources. It is also called heat recovery, which is kind of the same thing.

Most industrial manufacturers have processes connected with the heating of certain media. Typically, the remaining heat is not used and is released into the atmosphere. Nevertheless, for industrial enterprises, there is always a need for hot liquid, steam or air. An energy recovery system integrated into the process chain allows the use of secondary heat and thereby reduces the amount of gas or electricity consumed.

The installation of recuperators for the secondary use of heat residues makes it possible to get energy for the following purposes:

• heating of gases and liquids used for industrial processes of the enterprise;
• water heating for hot water supply;
• heating of office, industrial and storage spaces;
• preheating of raw materials before feeding them to the furnace

How is the price of the recuperator calculated?

For the correct selection of the recovery unit, it is necessary to obtain information in advance about the parameters of the working media involved in the heat transfer procedure.

It is necessary to understand the properties of technological flows, the presence or absence of aggressive or corrosive components in it. Based on the above, heat-exchange equipment is selected, and the cost of the device is calculated based on this information. It’s also needed to set correctly the temperature indicators of the media. Further, based on the data provided, the device is selected. All these factors directly influence the pricing of equipment.

Calculate Recuperator for
Supply and Exhaust Ventilation System

Go to calculation page
ankort

ADVANTAGES Plate-type recuperator ANKOR-TEPLOENERGO

Производство в Украине

  • Производство в Украине

  • Пластины любого размера

  • Срок изготовления от 3х дней

  • Индивидуальный расчет

  • Дальнейшее сервисное обслуживание

  • Техническая консультация

  • Сертификаты соответствия

  • Свои патенты

Дальнейшее сервисное обслуживание

Recovery in industry

Given the enormous volume of use of oil and its refined products, the problem of reducing evaporation is quite relevant. After all, they carry a huge amount of heat and can be used in a variety of technological processes.

Therefore, in refineries, the recovery of oil vapor is a very relevant solution. In general, almost any type of heat exchanger can be used as a recuperator. The plate-type recuperator is one of the most common options. The main reason is the fact that this type of device in 90% of cases is the most effective solution for problems for liquid and gaseous media. After all, heat recovery is saving of energy. And if at the same time the equipment for this is effective, then the cost reduction will be even more significant.

At enterprises, recovery is used in almost any line where raw materials can be found. For example, classic oil recuperators, where one stream is hot oil after deodorization, which must be cooled, and the other stream is oil, which must be preheated before further use on the line. In the dairy industry, recovery is also used in pasteurization, since milk must first be heated and then cooled.

Air recovery is relevant for rooms and small production lines, it makes possible to utilize the heat of the ambient air for one’s own needs. Moreover, many plants and enterprises have a large volume of effluents and waste that arise as a result of the specifics of the process. Waste recovery is also an important aspect of saving energy resources of any enterprise.

Buy heat recuperator ( of vapors)

Today, you can buy a recuperator from various suppliers. Nevertheless, when choosing a particular manufacturer, attention should be paid to some nuances.

If you want to buy a recuperator from us, the price will be exclusively from the manufacturer, and, therefore, the payback of the product comes quite quickly.

Owning your production makes it possible to control quality at all its stages.

Ankor-Teploenergo has been manufactured heat exchange equipment for over 27 years. During this time, enormous experience has been accumulated, and the specialists of this company have the appropriate qualifications.

Buying a recuperator from us means getting not only a high-quality product but also round-the-clock support from specialists on any operational issues.

Areas of application for a plate-type recuperator

Such devices are used in industries such as:
• housing and communal services;
• oil refining;
• food industry;
• energetics;
• cooling;
•chemical production;
•manufacturing.

    Buy Recuperator for
    Supply and Exhaust Ventilation System

    we will make the calculation for free!

    Leave a request on the site and our
    managers will contact you during the day