Manufacture of plate heat exchangers for the fat and oil industry.

Manufacture of plate heat exchangers for the fat and oil industry.

In the end of May 2017, company Ankor-Teploenergo produced two plate heat exchangers for the fat and oil industry.
During selecting the construct, experts of Ankor-Teploenergo took into account the nature of the media and the particular operation in each case, place in the technological scheme.
The first heat exchanger was manufactured for the technological position for heating sunflower oil up to 150 ° C. The plate heat exchanger has an full-welded core made of stainless steel grade 12H18N10T. The surface heat exchange area 36 m2.
Design pressure of the cooled media is 0.7 MPa, heated media is 0.6 MPa. The maximum design temperature for both media is 180 ° C. The thermal load is 293.21 kW.
The second plate heat exchanger is supplied on the technological position of the sunflower oil cooler. The heat exchanger consist of heat exchange plates placed between two plates, movable and stationary. In this heat exchanger, the sunflower oil is cooled by water from 90 to 30 ° C.
The surface area of ​​this heat exchanger was 15.36 m2. The maximum design pressure is 1,0 MPa. The heat exchanger cools 8.5 cubes of sunflower oil per hour. Thermal load of the heat exchanger is 243 kW.
Calculation, design and manufacture of plate heat exchangers were carried out in time and qualitative in accordance with specified technical characteristics.