Order

You can also download the questionnaire, fill it out offline and send it to our email: phe@ankort.com

FREE OF CHARGE CALCULATION

Cooled environment
(hot side)
Heated medium
(cold side)
InletOutletInletOutlet
Mediums name
Concentration or grade
Mediums temperatures t, °C, °C
Plate number, pcs          
In-service date ΔP          
Last service date G          
Form of failure Q     

DOWNLOAD THE QUESTIONNAIRE

 

 

ONLINE CALCULATION OF HEAT EXCHANGER

Before purchasing, it is necessary to calculate the plate heat exchanger. Given the variability of the tasks where they can be used, the selection of the heat exchanger shall be made individually for each position.

There is no catalogue for this type of equipment, where you could choose the model you like and order it. Except for the field of housing and communal services, where devices for heating and preparation of hot water have standard temperature conditions and it is possible to make a choice based on the desired heat load. But nevertheless, it is better to entrust the choice of suitable equipment to professionals, and request the calculation of plate heat exchanger from us, given that it is absolutely free.

As for the online calculation of heat exchangers, no manufacturer of this equipment will provide such an opportunity. After all, the software allowing to select such devices is rather complicated, and is often a commercial secret of the company, so it is not advisable to post it on the company website.

As an alternative to choose a heat exchanger online, we can offer filling out a questionnaire form on our website. There you indicate all the available parameters that the device should provide, and send them to us. If there is enough information, we will choose the required type of equipment and provide a technical and commercial proposal. If not, we will call you back to clarify the missing information.

 

 

HOW WE CHOOSE A HEAT EXCHANGER

As it was mentioned earlier, the calculation of heat exchanger should be carried out for each specific case individually, taking into account all the features of the position where it will be operated. The choice shall be carried out based on the data received from the customer.

You can provide the necessary information:

  • by filling out the questionnaire form on our website;
  • by filling out the questionnaire form and sending it to us by mail;
  • by contacting our manager and giving it all the necessary information orally.

We take into account all the wishes of the customer, regarding material design, types of connection with supply pipelines, or if you have limitations on dimensions, we will also take them into account. If no additional requirements are stated upon receipt of the initial information, a technical and commercial proposal for the basic equipment of the device will be provided.

You can state your wishes and additional requirements for the equipment after familiarization with the provided calculation, as a result of which it will be adjusted.

 

 

FREE OF CHARGE CALCULATION AND CHOICE OF PLATE HEAT EXCHANGERS

In order to calculate a plate heat exchanger, it is necessary to obtain data on its operating mode from the customer. It is usually sufficient to indicate the names of working fluids, their operating temperatures, flow rates, and heat load. Based on these data, the choice will be made. However, when it comes to complex technological positions, engineers may need additional information for a high-quality and more accurate calculation.

Our company manufactures a wide range of heat exchangers, ranging from classic gasketed ones to welded ones with removable shell, devices of increased reliability. Depending on the operating conditions and data received, we choose the appropriate type and calculate it, absolutely free of charge.

After receiving information from the customer and choosing the appropriate type of equipment, the customer shall be provided with a technical and commercial proposal, which indicates the cost, as well as the main technical characteristics. The proposal describes the design mode of operation, indicating the temperatures of working fluids, flow rates, design hydraulic resistance, as well as the transferred heat load. Further technical data shall be provided with indication of the number of plates, working area, type of the used connections, and so on. If all the device parameters suit you, you can order it from us and we will manufacture it for you as soon as possible. Alternatively, you can request an adjustment to the calculation for any parameter, and we will send you an updated document for consideration.

WE WILL DO THE CALCULATION FREE OF CHARGE

Leave a request on the website and our managers will contact you during the day